Yield · 8 minute read · Updated October 20, 2026
Ask ten growers what a plant yields and you get ten numbers, each from a different room. The research gives a better question to ask, and once you see it, your own scale becomes the most useful number you have.
Per plant sounds natural. You grow plants, you count plants. But a team at McGill University pooled the published yield studies into one meta-analysis, and found that plant density was not an effective predictor of yield per square meter. More plants in the same space mostly meant smaller plants, not more flower.
What did move yield per square meter: light intensity, light type, the variety, fertilizer, and how long the plants spent in flower.
So when you plan a grow, which number are you really trying to raise? For a tent, it is ounces per square foot. Per plant is just that number divided by how many plants share the floor.
The clearest data comes from a University of Guelph study that grew one cultivar under LEDs at light levels from 120 to 1,800 micromoles per square meter per second (the PPFD reading a quantum meter gives). Dry flower yield rose in a straight line with light, and had not leveled off even at the top.
| Canopy light (PPFD) | Dry flower per sq ft | Per square meter | For a 4x4 ft tent (arithmetic) |
|---|---|---|---|
| 120 | About 0.38 oz (10.8 g) | 116 g | About 6 oz |
| 1,800 | About 1.7 oz (48 g) | 519 g | About 27 oz (1.7 lb) |
Two honest notes. First, the top of that range used a very high light level, which takes a lot of light and heat to reach. Second, it is one cultivar flowered for 81 days. Your strain and room will land somewhere of their own. The useful lesson is the shape: more usable light on the canopy, more flower.
The same study found the light level did not change cannabinoid concentration. Brighter light made more flower, not different flower.
Grams per watt divides your dry harvest by the electrical watts your lights draw. The McGill meta-analysis reports published values of about 0.3 to 2.0 grams per watt, depending on strain, light intensity and plant density.
One older study under high-pressure sodium lamps ran three power levels, 25, 37 and 56 watts per square foot (270, 400 and 600 watts per square meter). Average yields ranged from 0.9 to 1.6 grams per watt, and the best efficiency came at the lowest power level. More lamp made more flower per square foot, but each extra watt returned a little less.
Treat any grams per watt figure as a rough benchmark. Most of these studies used older lamp types, and modern LEDs turn more of each watt into light. Our guide to how many watts an LED tent needs covers sizing a light.
Take the tent's total and divide. Using the Guelph range above, a 4x4 tent works out to roughly 6 to 27 ounces of dry flower in total, depending mostly on light. Four plants sharing that tent would each give a quarter of it; one big trained plant filling the same space would give about the same total on its own.
That is why how many plants fit in a 4x4 tent is really a question about how fast you want to fill the canopy, not how much you will harvest. Fewer plants need more veg time to fill the space. More plants fill it sooner.
Outdoor numbers swing more than indoor ones, because sun, season, plant size, pot or ground and weather all change. Published outdoor data on home-style growing is scarce.
One real example: a McGill study grew autoflowering plants outdoors in Quebec, in 12 liter (about 3 gallon) pots, over three seasons. The best fertilizer treatment gave about 38 grams (1.3 oz) of dry flower per plant. Larger photoperiod plants in the ground are grown much bigger, but we did not find a peer-reviewed per plant figure for them that we could stand behind, so we are not giving one.
Outdoors, late season rain and humidity also matter, because a crop lost to bud rot is the biggest yield loss there is.
| Factor | What the studies found |
|---|---|
| Light intensity | Yield rose in a straight line with canopy light up to 1,800 PPFD in the Guelph LED study. |
| Strain (variety) | The McGill meta-analysis lists variety among the factors that moved yield per square meter, so the same tent can give very different weights from one strain to the next. |
| Time in flower | The McGill meta-analysis found yield per square meter rose with a longer flowering period. |
| Plant density | More plants per area lowered grams per watt and did not predict yield per square meter. |
| Pot size | A predictor in the meta-analysis, but bigger was not simply better: going from 5 to 11 liter pots (about 1.3 to 2.9 gal) lowered THC per square meter in one variety. |
| Fertilizer | Influenced yield in the meta-analysis. Plants still need feeding while they build flowers. |
Notice what is near the top. Light and genetics decide most of it. Everything else is about using that light well. See LED light height by stage to get more of your light onto the buds.
Training. Training mostly works by spreading the canopy so more of it sits in strong light. Our guide to training plants to fill a tent and topping vs fimming show how.
Pot size. The meta-analysis is a good warning against oversizing: going from 5 to 11 liter pots lowered THC per square meter in one variety, so bigger is not automatically better. Match the pot to the plant and the time you have, using our pot size guide.
Veg time. A longer veg builds a bigger plant, which matters when few plants must fill a tent. The studies we read did not give a clean grams-per-extra-week number, so we will not invent one. What the data does show is that time in flower adds yield, which is one more reason not to cut early. See when to harvest by trichomes.
After two or three grows you will have something no article can give you: your room's real yield range. Canna GLAP records harvests by plant in your grow journal so you can compare grows side by side. How to keep a grow journal covers what to note.
It depends on how much space and light it has. In one LED study, yield ran from about 0.38 to 1.7 ounces per square foot, so a plant filling 4 square feet could give roughly 1.5 to 7 ounces. Divide your tent's harvest by its plants to get yours.
It is inside the published range of about 0.3 to 2.0 grams per watt. Treat it as a rough benchmark, since most of those studies used older lamp types.
Not by much. A meta-analysis of cannabis yield studies found plant density did not predict yield per square meter. More plants mainly fill the space sooner.
Not automatically. In the same meta-analysis, pot size predicted yield, but moving from 5 to 11 liter pots lowered THC per square meter in one variety. Match the pot to the plant and the time you have.
Dry. Fresh flower is mostly water, so wet weight varies with how wet the buds were. Weigh trimmed flower once it is dry enough for jars.
Education only, for adults 21+ where home cultivation is legal. Updated October 20, 2026.